Xinje Plc Usb Driver Install · High Speed

A Xinje PLC (e.g., XC, XD, or XL series) with a USB programming port. A compatible USB programming cable. A computer running Windows 7, 10, or 11.

Windows occasionally blocks Xinje drivers because they lack a digital signature verified by Microsoft.

The USB driver is necessary to connect Xinje PLCs (via the programming port) to a PC running Xinje’s programming software (XCPPro, AutoShop, etc.). When it works, it’s fine. But the installation process is a known pain point for many users.

Fix: Always use the exact same physical USB port on your PC laptop or desktop framework to maintain static mapping assignments inside the software profile. If you(Windows 10, 11, etc.) xinje plc usb driver install

Upon reboot, press or F7 to select Disable driver signature enforcement . Re-attempt the manual driver installation. 2. PLC Disconnects Randomly

Plug the programming cable (typically a USB-to-Round-Port cable or a standard USB-B/USB-C cable depending on the PLC port) into the PLC.

Right-click the file and select to unzip the contents into a dedicated folder. Step 2: Locate the Driver Files A Xinje PLC (e

Modern versions of Windows require all hardware drivers to be digitally signed by Microsoft. Because some older or legacy Xinje USB drivers lack this digital signature, Windows may block the installation with an error stating "The third-party INF does not contain digital signature information."

Click the button and target the driver folder you located in Step 1.

Once Windows recognizes the hardware, configure your programming software to communicate with the PLC: Launch or XC Software . Windows occasionally blocks Xinje drivers because they lack

C:\Program Files (x86)\XBuilder\Driver or C:\XBuilder\USB_Driver For XC Series (XCPro): C:\Program Files (x86)\XCPro\Driver

A small installation wizard will appear. Click or Next .