Tap . If one is available, follow the on-screen instructions to download and install it. The device will restart automatically once finished. Method 2: Manual Recovery (Using a PC/SD Card)
Over time, Android system caches degrade. Reinstalling the original firmware returns the tablet to its original factory speed.
Download the Rockchip-compatible Pritom M10 firmware, Rockchip USB drivers, and RKBatchTool (or AndroidTool). Open RKBatchTool: Launch the application on your computer.
If OTA updates are not showing, your regional firmware might have been modified. In that case, manual flashing via PC is required. pritom m10 firmware
A progress bar will track the download and verification phases. Do not touch the cable during this process.
If your Pritom M10 uses an Allwinner chip, follow these steps: Launch the application on your PC. Click on the Firmware tab at the top of the interface.
To attempt a GSI installation on your M10: Method 2: Manual Recovery (Using a PC/SD Card)
You can try reaching out to Pritom's official site via their contact form. Provide your Build Number and ask for the latest image file. 3. Essential Tools for Flashing The tool you need depends on the chipset inside your M10:
Used if your tablet runs on a Rockchip processor. Step 2: Install Drivers and Prepare Flashing Tools Extract the downloaded USB drivers to a folder on your PC. Open Device Manager on your Windows PC.
A progress bar will fill up. Once it reaches 100%, a success message will display. Disconnect the USB cable and turn on your tablet. Method B: For Rockchip Chipsets (Using RKBatchTool) Open RKBatchTool: Launch the application on your computer
For the average user, interacting with the Pritom M10’s firmware is invisible. However, for technicians and advanced hobbyists, firmware management is essential. Because Pritom does not maintain a robust global support portal, users often turn to third-party forums like or 4PDA to find original firmware files (usually in .img or .pac format). Flashing, or reinstalling, the firmware using PC tools like Rockchip Batch Tool or PhoenixSuit is the standard method of rescuing a "bricked" device. This process is risky; using the wrong firmware variant for a specific M10 revision (e.g., different touchscreen controllers) can render the tablet permanently unusable.
For severe issues such as the device being stuck in a boot loop (constantly restarting) or not starting up at all, a more advanced method using a PC is necessary. This involves using ADB (Android Debug Bridge) commands.
Go to Settings > About Tablet > Build Number . Note this down; it is the most reliable way to match firmware.
Commonly found in standard M10 and M10 Air models.
Extract and install the USB drivers so your PC can recognize the tablet in download mode.