Configure Microsoft Edge to reload the camera's IP address in "IE Mode." 3. Step-by-Step Guide to Open the Mobotix M10 Menu

Ensure your computer’s IP address matches the subnet structure of the M10. If the camera is 192.168.2.15 , your computer must be set to 192.168.2.x .

Do you know the of the camera, or are you trying to find it?

To open the menu, you need the unique network address of the device. Mobotix cameras ship with a factory-default IP address derived from their MAC address.

If this is your first time accessing the Admin Menu, or after a factory reset, the camera will automatically launch the [9†L5-L9]. This tool guides you step-by-step through defining your network (IP, Subnet, Gateway) and setting up ISDN or SIP phone connections. It is highly recommended to run this wizard even if you plan to use advanced settings later.

Once the IP address is entered into the browser bar, the operator is greeted by the "Live Screen." This is the default view of the camera, displaying the live video feed. To the uninitiated, this screen appears static; there is no obvious hamburger menu or gear icon in the corner as seen in modern UI designs. Instead, the M10 relies on a vertical menu bar located on the left-hand side of the frame. If this menu bar is not visible, the browser may be in "Fullscreen" mode, which can be toggled by moving the mouse to the edge of the screen or pressing the Esc key.

Adjust frame rate, image quality, and exposure for both the left and right sensors.