Mks Laser Tool Setup V1.1.2.exe ~repack~ Download Page

Under Laser Settings , you can modify the PWM frequency (default 20 kHz). Lower frequencies (5–10 kHz) are better for ceramic engraving, while higher frequencies (30–40 kHz) produce smoother wood burns.

If you are having trouble running the .exe after downloading, follow these common fixes:

Click on the or software folder within the repository. Locate the file named Mks Laser Tool Setup V1.1.2.exe . Mks Laser Tool Setup V1.1.2.exe Download

: LONGER3D maintains a public repository at https://github.com/LONGER3D/Longer-Laser , which includes the MKS Laser Tool as part of the LaserTool download package. This is a frequently recommended download source, especially for LONGER machine owners.

Ensure you are using the correct firmware file ( .bin ) that matches your specific machine version. Under Laser Settings , you can modify the

Mks Laser Tool Setup V1.1.2.exe Download: Complete Guide and Installation

Open Windows and verify that a device appears under "Ports (COM & LPT)" as CH340 . Step 2: Run the Installer Locate the downloaded Mks Laser Tool Setup V1.1.2.exe file. Right-click the file and select Run as administrator . Locate the file named Mks Laser Tool Setup V1

Remember to always power down your laser module before connecting or disconnecting the USB cable to avoid back-voltage damage to your motherboard.

Choose your specific board model from the configuration list.