En caso de pérdida o rotura de tu control remoto original, tienes varias opciones:
: Ajusta la temperatura gradualmente durante la noche para ahorrar energía eléctrica. Configuración con Control Universal (Códigos Westpoint) En caso de pérdida o rotura de tu
| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | No response from AC | Dead remote batteries | Replace with 2x AAA alkaline batteries. | | | IR signal blocked | Remove obstacles, aim at indoor unit’s receiver. | | | AC not plugged in | Check power cord and circuit breaker. | | Display dim or absent | Weak batteries | Replace batteries. | | Unit works but not cooling | Wrong mode | Ensure (snowflake icon) is selected. | | | Temperature too high | Lower set temp below room temperature. | | Random on/off | Timer set accidentally | Press TIMER repeatedly until "0.0" appears. | | | | AC not plugged in |
: Adjusts the vertical or horizontal louvers to direct airflow. Advanced Settings TURBO / STRONG | | | Temperature too high | Lower
(Water Droplet): Dehumidifies the room. Fan speed is usually fixed. (Sun): Heats the room (only available on heat pump models). : Circulates air without cooling or heating. TEMP (+ / - or Arrows) : Adjusts the target temperature, typically between : Cycles through fan settings.
For the Eoliaepubl, the manual override is typically located in an unexpected place: