: Periodically verify the door's balance by manually opening and closing it to ensure there is no catching or swinging.
┌──────────────────────────────────────────────────────────┐ │ ⚠️ DANGER: HIGH VOLTAGE RISK │ │ Always disconnect 230V mains prior to removing cover. │ └──────────────────────────────────────────────────────────┘ Pre-Installation Door Diagnostics
: The minimum distance from the ceiling should be 40mm , and the distance from the runner to the door must be between 10mm and 65mm . : Periodically verify the door's balance by manually
Regular maintenance is essential to ensure the optimal performance and longevity of the Life Pro Bo PR70. The following steps should be followed:
Press and hold the for 5 seconds until all LEDs between '+' and '-' light up. Regular maintenance is essential to ensure the optimal
: The installation area must have adequate space for manual release and maintenance. For sectional doors, a minimum vertical distance of 40mm from the ceiling is required.
is suitable for doors with a maximum width of 5 meters, provided they are perfectly balanced. For sectional doors, a minimum vertical distance of
: Garages without a second entrance require an ASEC PR device for outside manual release.
: Ensure the door is balanced and in good mechanical condition. Motor Mounting : Open the operator hatch and loosen clamping screws. Remove the omega-shaped support brackets.