Hw-417-v1.2 Driver !!top!! Direct

CH341SER (This single packet supports CH340, CH341, and all sub-variants like CH340G, CH340C, and CH340N). Step-by-Step Installation Guide 1. Windows Installation (Windows 10 & 11)

Extract the file, run the .pkg installer, and follow the on-screen prompts.

Cons

Connects to the RX (Receive) pin of your microcontroller.

Ensure you have uninstalled any old or "fake" Prolific/FTDI drivers that might be conflicting with the COM port assignment. hw-417-v1.2 driver

This will list all serial devices. If your adapter is recognized, you will see an entry like /dev/cu.usbserial-XXXXXX or /dev/cu.usbmodemXXXXX . If you see it, your driver is working correctly.

Offers dual voltage options, allowing users to choose between 3.3V and 5.5V (5V) TTL logic levels via a jumper, making it safe for both low-power and standard microcontrollers. CH341SER (This single packet supports CH340, CH341, and

Many hobbyist sites like SparkFun or Adafruit host these drivers if the manufacturer's site is slow. 3. Installation Guide For Windows (7, 10, and 11) Download the CH341SER.EXE file. Unplug the HW-417 module from your USB port. Run the installer as an Administrator.

allows for stable, high-speed serial data transfer over a USB connection Key Technical Features Dual Voltage Support: The board includes a jumper that lets you toggle between 3.3V and 5.5V Cons Connects to the RX (Receive) pin of

Provides standard pins including DTR (for Arduino auto-reset), RXD, TXD, VCC, and GND. Why Do You Need the HW-417-v1.2 Driver?