Galletto 1260 Drivers Windows 10 Fixed Jun 2026

Select the .inf file (usually ftdiport.inf or ftdibus.inf ), click , and proceed with the installation. If Windows displays a red warning box about unsigned drivers, click Install this driver software anyway .

With these steps, your will be fixed, allowing you to flash your ECU without driver-related interruptions.

: Unplug your cable, go to Device Manager , and uninstall any existing "EOBD2" or "USB Serial" devices associated with the cable to start fresh. galletto 1260 drivers windows 10 fixed

Check and click Apply . 4. Connection Troubleshooting

Here is your step-by-step guide to a fully fixed Galletto 1260 setup. Select the

Many users have reported success with driver version 2.8.14.0 or 2.12.28.0 for FT232RL-based cables. Some newer Galletto cables used a clone FT232RL chip and recent FTDI drivers included a "bricking" feature for counterfeit chips. Version 2.8.14.0 is known to be safe, as it does not contain this anti-counterfeit code.

For the Galletto 1260 software to successfully read and write to an ECU without communication dropouts, you must adjust the port settings. In Device Manager, expand . Right-click USB Serial Port (COMX) and select Properties . Go to the Port Settings tab and click Advanced . : Unplug your cable, go to Device Manager

ECU remapping carries risks. Always ensure your vehicle battery is charged, and you have a backup of your original ECU file. If you are still having trouble,

Working Windows 10 builds: 1809 – 22H2 Not working (easily): Windows 10 1709 and earlier (no need – fix works)