Configure your computer’s network adapter with a static IP address in the 192.168.1.x subnet (e.g., IP: 192.168.1.50 , Subnet Mask: 255.255.255.0 ).
The default IP address for the Internal/LAN interface after a reset is 192.168.1.99 .
When prompted with "This operation will reset the system to factory default! Do you want to continue? (y/n)", type fortigate 30d factory reset full
How to Perform a Full Factory Reset on a FortiGate 30D: A Complete Guide
The system will display a warning prompt: This operation will revert the system to factory default settings! Do you want to continue? (y/n) Type and press Enter . Configure your computer’s network adapter with a static
Verify that your computer's static IP is correctly set and that you are not using a dynamic DHCP address. Ensure the Link LED on the connected FortiGate switch port is lit. If HTTPS fails, try accessing via HTTP ( http://192.168.1.99 ).
If you have administrative access to the device via Console, SSH, or the Web GUI's CLI console, you can use a command to trigger the reset. Log in with an account that has permissions. Enter the following command: execute factoryreset When prompted to confirm (y/n), type y . The system will reboot with default settings. Post-Reset Access How to reset Fortigate 30D to factory default Do you want to continue
If the hardware button method feels imprecise or isn't working (sometimes the button can be finicky), using the Boot Menu is the most reliable way to ensure a full format.
The internal switch ports are assigned a static IP address of 192.168.1.99 with a subnet mask of 255.255.255.0 .
Locate the small hole labeled on the back or side panel of the unit.
If you are locked out or don't have a console cable, you can use the pinhole reset button. Standard Reset : With the unit powered on, use a pin to press and hold the