Once the bar turns green, the drive should be initialized and working again. Where to Find Firstchip MPTools v1.05.2 / Download Link
Identify the Controller: Use a tool like ChipGenius or Flash Drive Information Extractor to confirm your drive uses the FC1178 or FC1179 controller. If the controller doesn't match, this tool will not work.
Download and run (v4.19 or later). Insert your dead USB drive. Look for output like: firstchip fc1178 fc1179 mptools v1052 link
:
: usbdev.ru provides the most direct access to V1.0.5.2 and subsequent updates. Once the bar turns green, the drive should
Insert your USB drive into a USB 2.0 or USB 3.0 port on the motherboard's rear panel (front panel ports can cause connection drops).
If the controller is completely dead, you may need to open the casing and short two specific flash memory pins while plugging it in. Note: This is risky and should only be done if you are comfortable with hardware modifications. Conclusion Download and run (v4
: These tools (MPTools) are designed for low-level formatting, fixing "write protected" errors, and restoring fake capacity drives to their true size. Safety Warning : Using these tools will wipe all data
– this is normal for MPTools (heuristic for hacking tools). Use at your own risk.