The following parameters can be set in the 'ABULiner' parameter level of the LIS-SV.
|
Parameter |
Designation |
See |
|
5.10 |
Calling up the parameter level |
|
|
5.11 |
Activating the LIS-SV for the ABULiner |
|
|
5.11 |
Setting the gear ratio |
|
|
5.12 |
Activating double lifting speed |
|
|
5.14 |
Setting the run-on time of the auxiliary fan |
|
|
Danger during setting work! During setting work on the LIS-SV, monitoring of the wire rope hoist is switched off. This means the wire rope hoist cannot be monitored for excess load, among other things. This means the wire rope hoist cannot be monitored for excess load, among other things. This in turn means the load could fall and kill or injure people! Do not use the crane for normal work during setting work, and only lift loads very carefully for test purposes! |
All LIS-SV parameters which are important for the ABULiner are combined in a separate parameter level, which is shown as a submenu.
|
|
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Open the menu of the
LIS-SV. See the documentation “Load indicator system LIS-SV”.
|
| |
|
Enter button |
Arrow buttons |
Select parameter 5.10.
Press ENTER.
● The 'ABULiner' parameter level is activated.
● Parameter 5.11 is displayed.
|
| |
|
Enter button |
Arrow buttons |
Select parameter 5.99.
Press ENTER.
● The previous parameter level is reactivated.
● Parameter 5.10 is displayed.
The LIS-SV is automatically activated for the ABULiner if a value is entered for the parameter 5.11.
In the ABULiner mode (a value is set for parameter 5.11):
─ The LIS-SV can monitor the total load for a maximum of two wire rope hoists.
─ Input F3 (normally used for measuring the load of wire rope hoist 3) now serves in monitoring the current rotational frequency of the hoist motor.
─ A value can be entered for parameter 3.0 (maximum load capacity of wire rope hoist 3). If a value is entered for this, parameter 5.11 cannot be set.
─ This interlocking thus excludes an incorrect setting.
─ The load-controlled switching point at output TxD of the LIS-SV cannot be used.
─ Parameter 4.5 (setting for load-controlled switching point) is not available.
In the normal mode (no value is set for parameter 5.11):
─ Operation of the ABULiner Lifting/Lowering unit is not possible.
─ The LIS-SV can monitor the total load for up to three wire rope hoists.
─ Input F3 serves in measuring the load of a third wire rope hoist.
─ A value can be entered for parameter 5.11 (gear ratio). If a value is entered for this, parameter 3.0 cannot be set.
─ This interlocking thus excludes an incorrect setting.
─ The load-controlled switching point at output TxD of the LIS-SV can be used.
─ Parameter 4.5 (setting for load-controlled switching point) can be used.
The LIS-SV uses the signal of the encoder and the gear ratio of the hoisting gear to calculate the hook travel distance, the maximum distance in the limit switch range and the current rotational frequency of the hoist motor. The gear ratio must be set on the machine.
|
| |
|
Cable speed |
|
Read off the type
designation at the type plate of the wire rope hoist.
Read off the cable
speed.
From this table, select
the gear ratio that matches the cable speed.
|
Cable speed | |||||
|
Hoist motor GM |
32 m/min at 50 Hz |
25 m/min at 50 Hz |
20 m/min at 50 Hz |
16 m/min at 50 Hz | |
|
800.4 |
50.01 |
63.49 |
77.77 |
98.16 | |
|
800.5 |
47.03 |
60.04 |
74.66 |
95.03 | |
|
1000.6 |
54.43 |
68.91 |
84.00 |
105.1 | |
|
1000.7 |
54.60 |
68.06 |
81.45 |
104.6 | |
|
2000.3 |
58.22 |
74.23 |
91.19 |
118.4 | |
|
3000.4 |
73.61 |
93.92 |
118.4 |
152.9 | |
|
5000.3 |
85.14 |
109.3 |
132.8 |
169.0 | |
|
5000.4 |
80.20 |
104.9 |
127.7 |
160.6 | |
|
6000.3 |
94.69 |
118.5 |
149.6 |
182.7 | |
|
7000.1 |
118.0 |
148.3 |
182.6 |
232.0 | |
Table: Gear ratios (numerical values) depending on hoist motor (lines) and cable speeds (columns) at 50 and 60 Hz.
|
| |
|
Enter button |
Arrow buttons |
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Select parameter 5.11.
Press ENTER.
● The set value is displayed.
If the value is 0.00, the function is deactivated.
● Hold ENTER pressed.
● CODE is displayed.
Hold ENTER pressed.
|
| |
|
Enter button |
Arrow buttons |
Enter the code 1443.
Press ENTER briefly.
|
| |
|
Enter button |
Arrow buttons |
Set the value from the
table.
If the display ‘0.00’ cannot be changed, a value is set in parameter 3.0. In this case, set the value to zero first.
Press ENTER briefly.
It targets the 2024 Hindi action-drama film Aadesh , directed by Ravi Sharma. The string represents the exact title formatting used on third-party media indexers and torrent networks.
The phrase represents a highly specific search pattern commonly used by internet users looking to download or stream the 2024 Indian action-drama film Aadesh from third-party websites.
A 720p movie file is more portable and easier to store, making it ideal for offline viewing. The Search for "Portable" Content
Illegal download hubs do not rely on standard subscription fees. Instead, they monetize traffic through aggressive advertising networks. Clicking on unverified download links frequently triggers drive-by downloads, injecting Trojan horses, spyware, or ransomware into your device. 2. Malicious Executables Disguised as Video Files aadesh 2024 www9kmoviescom hindi 720p hq pred portable
Set in the village of Palanpur, the film centers on a fearless IPS officer who takes on the criminal reign of Thakur Loha Singh. Driven by a personal loss and a mission for redemption, the protagonist faces off against high-profile criminals and influential figures to restore law and order. Technical Specifics
For consumers, the benefits are clear:
Riya owned a small bakery in a busy neighborhood. Business was steady, but she worried about competition from a new café down the street. One morning she found an old recipe box from her grandmother with a note: "Bake what you love, and people will feel it." It targets the 2024 Hindi action-drama film Aadesh
"Aadesh" suggests a strong, decisive narrative, often associated with police, action, or family dramas. Decoding the Search Query Trends
According to major entertainment platforms, "Aadesh" was a Hindi movie that had its theatrical release in late July and early August 2024. eTimes reports the release date as , while Bollywood Hungama states it was scheduled for 02 August, 2024 . The film was certified with a UA (Unrestricted with Parental Guidance) rating, indicating it contained some material suitable for mature audiences.
: Direct download buttons on these directories frequently install hidden spyware, adware, or trojan horses onto mobile and desktop systems. A 720p movie file is more portable and
For film enthusiasts looking past the download syntax, Aadesh is an independent Hindi-language action-drama that received its wide theatrical release in late July 2024. Ravi Sharma Lead Cast
In the realm of Indian cinema, the year 2024 is shaping up to be a significant one, with numerous highly anticipated films slated for release. Among these, has generated considerable buzz, captivating the attention of movie enthusiasts and fans alike. As the excitement builds, the film's availability on popular streaming platforms and torrent sites, such as www.9kmovies.com , has become a topic of interest. This article aims to provide an in-depth look at Aadesh 2024 , its expected release, and the implications of its availability in Hindi 720p HQ and pred portable formats.
The auxiliary fan of the hoist motor continues to run for several minutes after the lifting or lowering. This ensures that the hoist motor is adequately cooled even at slow lifting speeds. The run-on time can be adjusted.
|
| |
|
Enter button |
Arrow buttons |
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Select parameter 5.14.
Press ENTER.
● The set value is displayed.
|
| |
|
Enter button |
|
Set the value to between 3
and 10 minutes using the arrow buttons.
Press ENTER.
